ZyXEL Communications ZyWall 110 User Manual page 973

Figure 694 Configuration > Log & Report > Log Setting > Edit (USB Storage)
The following table describes the labels in this screen.
Table 395 Configuration > Log & Report > Log Setting > Edit (USB Storage)
LABEL DESCRIPTION
Duplicate logs to Select this to have the Zyxel Device save a copy of its system logs to a connected USB storage
USB storage (if device. Use the Active Log section to specify what kinds of messages to include.
ready)
Enable log keep Select this checkbox to enter a value in the Keep Duration field.
duration:
Keep duration: Enter a number of days that the Zyxel Device keeps this log.
Active Log
Selection Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and alerts for
all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
# This field is a sequential value, and it is not associated with a specific entry.
Log Category This field displays each category of messages. The Default category includes debugging
messages generated by open source software.
Chapter 45 Log and Report
ZyWALL USG Series User's Guide
973