The Snat Status Screen - ZyXEL Communications ZyWall 110 User Manual

Table 416 Maintenance > Packet Flow Explore > Routing Status (continued)
LABEL
Destination
Trunk

48.3 The SNAT Status Screen

The SNAT Status screen allows you to view and quickly link to specific source NAT (SNAT) settings. Click a
function box in the SNAT Flow section, the related SNAT rules (activated) will display in the SNAT Table
section. To access this screen, click Maintenance > Packet Flow Explore > SNAT Status.
The order of the SNAT flow may vary depending on whether you:
• select use default SNAT in the CONFIGURATION > Network > Interface > Trunk screen.
• use policy routes to control 1-1 NAT by using the policy control-virtual-server-rules
activate command.
Note: Once a packet matches the criteria of an SNAT rule, the Zyxel Device takes the
corresponding action and does not perform any further flow checking.
Figure 733 Maintenance > Packet Flow Explore > SNAT Status (Policy Route SNAT)
Figure 734 Maintenance > Packet Flow Explore > SNAT Status (1-1 SNAT)
Chapter 48 Packet Flow Explore
DESCRIPTION
This is the destination IP address(es) to which the packets are transmitted. any means any IP
address.
This is the name of the WAN trunk through which the matched packets are transmitted.
ZyWALL USG Series User's Guide
1022