Geo Ip Summary Screen - ZyXEL Communications ZyWall 110 User Manual

Hide thumbs Also See for ZyWall 110:

Table of Contents

Figure 586 IPv4/IPv6 Address Group Configuration > Add

The following table describes the labels in this screen.

Table 327 IPv4/IPv6 Address Group Configuration > Add

Address Type

43.7.4 Geo IP Summary Screen

Use this screen to update the database of country-to-IP and continent-to-IP address mappings and

manually configure custom country-to-IP and continent-to-IP address mappings in geographic address

Chapter 43 Object

Enter a name for the address group. You may use 1-31 alphanumeric characters,

underscores(

), or dashes (-), but the first character cannot be a number. This value is case-

This field displays the description of each address group, if any. You can use up to 60

characters, punctuation marks, and spaces.

Select the type of address (Address, GEOGRAPHY, and FQDN) you want to create.

Note: The Zyxel Device automatically updates address objects that are based on an

interface's IP address, subnet, or gateway if the interface's IP address settings

change. For example, if you change 1's IP address, the Zyxel Device

automatically updates the corresponding interface-based, LAN subnet

address object.

The Member list displays the names of the address and address group objects that have been

added to the address group. The order of members is not important.

Select items from the Available list that you want to be members and move them to the

Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key to

select multiple entries and use the arrow button to move them.

Move any members you do not want included to the Available list.

Note: Only objects of the same address type can be added to a address group.

Click OK to save your changes back to the Zyxel Device.

Click Cancel to exit this screen without saving your changes.

ZyWALL USG Series User's Guide

Show Quick Links

Table of Contents