The Dhcpv6 Lease Screen - ZyXEL Communications ZyWall 110 User Manual

Table 359 Configuration > DHCPv6 > Request > Add (continued)
LABEL
Interface
OK
Cancel

43.15.2 The DHCPv6 Lease Screen

The Lease screen allows you to add, edit, and remove DHCPv6 lease type objects. To access this screen,
login to the Web Configurator, and click Configuration > Object > DHCPv6 > Lease.
Figure 631 Configuration > Object > DHCPv6 > Lease
The following table describes the labels in this screen.
Table 360 Configuration > Object > DHCPv6 > Lease
LABEL
Configuration
Add
Edit
Remove
References
#
Name
Type
Interface
Value
43.15.2.1 DHCPv6 Lease Add/Edit Screen
The Lease Add/Edit screen allows you to create a new lease object or edit an existing one.
To access this screen, go to the Lease screen (see
Add icon or an Edit icon.
Chapter 43 Object
DESCRIPTION
Select the interface for this request object.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific object.
This field displays the name of each lease object.
This field displays the request type of each lease object.
This field displays the interface used for each lease object.
This field displays the value for each lease object.
ZyWALL USG Series User's Guide
Section 43.15.2 on page
904
904), and click either the