The Routing Traces Screen - ZyXEL Communications ZyWall 110 User Manual

Table 412 Maintenance > Diagnostics > Network Tool (continued)
LABEL
The following fields display when you select Test Email Server in Network Tool.
Mail Server
Mail Subject
Mail Server Port
TLS Security
STARTTLS
Authenticate Server
Mail From
Mail To
SMTP Authentication
User Name
Password
Retype to Confirm
Test
Stop
Reset

47.8 The Routing Traces Screen

Click Maintenance > Diagnostics > Routing Traces to display this screen. Use this screen to configure a
traceroute to identify where packets are dropped for troubleshooting.
Figure 722 Maintenance > Diagnostics > Routing Traces
DESCRIPTION
Type the name or IP address of the outgoing SMTP server.
Type the subject line for the outgoing e-mail.
• Select Append system name to add the Zyxel Device system name to the subject.
• Select Append date time to add the Zyxel Device date and time to the subject.
Enter the same port number here as is on the mail server for mail traffic.
Select this option if the mail server uses Transport Layer Security (TLS) for encrypted
communications between the mail server and the Zyxel Device.
Select this option if the mail server uses SSL or TLS for encrypted communications
between the mail server and the Zyxel Device.
Select this if the Zyxel Device authenticates the mail server in the TLS handshake.
Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Type the e-mail address to which the outgoing e-mail is delivered.
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type a
password of up to 63 characters to provide to the SMTP server when the log is e-mailed.
Retype your new password for confirmation.
Click this button to start the test.
Click this button to stop the test.
Click this button to return the screen to its last-saved settings.
ZyWALL USG Series User's Guide
1013