ZyXEL Communications ZyWall 110 User Manual page 93

• For Zyxel Devices that already have firmware version 4.25 or later, you have to register your Zyxel
Device and activate the corresponding service at myZyxel (through your Zyxel Device).
• For Zyxel Devices upgrading to firmware version 4.25, you may skip registering your Zyxel Device and
activating the corresponding service at myZyxel. However, it is highly recommended to at least
register your Zyxel Device.
You will see the following prompt if your Zyxel Device is not registered.
Click the Register button in this screen to register your device at portal.myzyxel.com. You need to create
a myZyxel account at portal.myzyxel.com before you can register your device and activate the services
at myZyxel.
When registering the Zyxel Device at myZyxel, if you are prompted for the Zyxel Device's serial number
and LAN MAC address, see the label at the back of the Zyxel Device's.
Note: The Zyxel Device must be connected to the Internet in order to register.
Chapter 4 Easy Mode
ZyWALL USG Series User's Guide
93