ZyXEL Communications ZyWall 110 User Manual page 34

Figure 9 Managing the Zyxel Device: Web Configurator
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the Zyxel Device. Access it using remote
management (for example, SSH or Telnet) or via the physical or Web Configurator console port. See the
Command Reference Guide for CLI details. The default settings for the console port are:
Table 2 Console Port Default Settings
SETTING VALUE
Speed 115200 bps
Data Bits 8
Parity None
Stop Bit 1
Flow Control Off
FTP
Use File Transfer Protocol for firmware upgrades and configuration backup/restore.
SNMP
The device can be monitored and/or managed by an SNMP manager. See
Cloud CNM
Use the Cloud CNM screen (see
the Zyxel Device by a Central Network Management system.
Management Authentication
Managers must be authenticated with a username and password, using one of:
Zyxel Device
• Local authentication
• An external RADIUS server
Chapter 1 Introduction
Section 44.15 on page
ZyWALL USG Series User's Guide
34
Section 44.11 on page
957) to enable and configure management of
947.