Device Information (For Zyxel Device Client) - ZyXEL Communications ZyWall 110 User Manual

Table 70 Monitor > Cloud CNM > SecuDeployer > Device Information (ZyXEL device in Server Role)
LABEL
Profile Template
Interface
#
Name
Type
Subnetting
DHCP server
IPSec VPN
#
Name
Policy
Algorithm
IKE Version
Routing
#
Name
Type
Traffic Direction
Destination
Next-hop
Close

7.27.2 Device Information (for Zyxel Device Client)

When the Zyxel Device is in client role and you double click a Zyxel Device SecuDeployer server entry,
this screen displays the server's information, and the settings applied by the Zyxel Device SecuDeployer
server.
Chapter 7 Monitor
DESCRIPTION
This displays the name of the SecDeployer template being used by the Zyxel Device
SecuDeployer client.
The fields below display interface related details on the Zyxel Device SecuDeployer
client.
This displays the Zyxel Device SecuDeployer client interface entry number.
This displays the Zyxel Device SecuDeployer client interface name.
This displays the type of network (internal) to which this interface will connect.
This displays the interface's subnet on the Zyxel Device SecuDeployer client.
This displays whether a DHCP server that is on the network connected to this interface will
assign TCP/IP information to devices on this network.
The fields below display IPSec related details on the Zyxel Device SecuDeployer client.
This displays the Zyxel Device SecuDeployer client IPSec entry number.
This displays the Zyxel Device SecuDeployer client IPSec entry name.
This displays the Zyxel Device SecuDeployer client IPSec scenario: Site-to-site (Policy
Based) or VTI (Route Based).
This displays the encryption, authentication algorithm, and key group the IPSec VPN
profile is using.
This displays the IKE version the IPSec VPN profile is using.
The fields below display static route related details on the Zyxel Device SecuDeployer
client.
This displays the Zyxel Device SecuDeployer client static route entry number.
This displays the Zyxel Device SecuDeployer client static route entry name.
This displays the type of the route (Static Route).
This displays the direction of traffic packets for which the route applies: Server to Client or
Client to Server.
This displays the destination IP address and the subnet mask of the route.
This displays the next-hop gateway or the interface through which the traffic is routed.
Click this to close this screen.
ZyWALL USG Series User's Guide
242