The Session Monitor Screen - ZyXEL Communications ZyWall 110 User Manual

Table 40 Maximum Values for Reports (continued)
LABEL
Byte Count Limit
Hit Count Limit

7.5 The Session Monitor Screen

The Session Monitor screen displays all established sessions that pass through the Zyxel Device for
debugging or statistical analysis. It is not possible to manage sessions in this screen. The following
information is displayed.
• User who started the session
• Protocol or service port used
• Source address
• Destination address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all established sessions that passed through the Zyxel Device by user, service, source IP
address, or destination IP address. You can also filter the information by user, protocol / service or service
group, source address, and/or destination address and view it by user.
Click Monitor > System Status > Session Monitor to display the following screen.
Figure 171 Monitor > System Status > Session Monitor
Chapter 7 Monitor
DESCRIPTION
64
2 bytes; this is just less than 17 million terabytes.
64
2 hits; this is over 1.8 x 10
ZyWALL USG Series User's Guide
207
19
hits.