Vpn Express Wizard - Finish - ZyXEL Communications ZyWall 110 User Manual

Figure 83 VPN Express Wizard: Summary
• Rule Name: Identifies the VPN gateway policy.
• Secure Gateway: IP address or domain name of the remote IPSec device. If this field displays Any,
only the remote IPSec device can initiate the VPN connection.
• Pre-Shared Key: VPN tunnel password. It identifies a communicating party during a phase 1 IKE
negotiation.
• Local Policy: IP address and subnet mask of the computers on the network behind your Zyxel Device
that can use the tunnel.
• Remote Policy: IP address and subnet mask of the computers on the network behind the remote
IPSec device that can use the tunnel. If this field displays Any, only the remote IPSec device can
initiate the VPN connection.
• Copy and paste the Configuration for Secure Gateway commands into another ZLD-based Zyxel
Device's command line interface to configure it to serve as the other end of this VPN tunnel. You can
also use a text editor to save these commands as a shell script file with a ".zysh" filename extension.
Use the file manager to run the script in order to configure the VPN connection. See the commands
reference guide for details on the commands displayed in this list.

4.6.5 VPN Express Wizard - Finish

Now the rule is configured on the Zyxel Device. The Phase 1 rule settings appear in the VPN > IPSec VPN
> VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec VPN > VPN Connection
screen.
Chapter 4 Easy Mode
ZyWALL USG Series User's Guide
111