Vpn Express Wizard - Finish - ZyXEL Communications 310 User Manual

Chapter 4 Quick Setup Wizards
Figure 34 VPN Express Wizard: Summary
• Rule Name: Identifies the VPN gateway policy.
• Secure Gateway: IP address or domain name of the remote IPSec device. If this field displays
Any, only the remote IPSec device can initiate the VPN connection.
• Pre-Shared Key: VPN tunnel password. It identifies a communicating party during a phase 1
IKE negotiation.
• Local Policy: IP address and subnet mask of the computers on the network behind your ZyWALL
that can use the tunnel.
• Remote Policy: IP address and subnet mask of the computers on the network behind the
remote IPSec device that can use the tunnel. If this field displays Any, only the remote IPSec
device can initiate the VPN connection.
• Copy and paste the Configuration for Secure Gateway commands into another ZLD-based
ZyWALL's command line interface to configure it to serve as the other end of this VPN tunnel. You
can also use a text editor to save these commands as a shell script file with a ".zysh" filename
extension. Use the file manager to run the script in order to configure the VPN connection. See
the commands reference guide for details on the commands displayed in this list.

4.3.6 VPN Express Wizard - Finish

Now the rule is configured on the ZyWALL. The Phase 1 rule settings appear in the VPN > IPSec
VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec VPN >
VPN Connection screen.
52
ZyWALL 110/310/1100 Series User's Guide