Mail Server Password Field; E-Mail Addressee Fields - Extron electronics Matrix 12800 Series User Manual

Wideband, video, sync, or audio switchers
Hide thumbs Also See for Matrix 12800 Series:
Table of Contents

Advertisement

im Vertrieb von
Virtualization/Control Software, cont'd

Mail Server Password field

The Mail Server Password field displays the password that the Matrix 12800 uses to
log on to the e-mail server. Passwords are case sensitive and are limited to 12
upper case and lower case alphanumeric characters. A carriage return is indicated
by .
Edit this field as follows:
1.
2.
3.
4.

E-mail Addressee fields

The nine E-mail Addressee fields permit the administrator to identify the e-mail
addresses of the personnel to whom the Matrix 12800 e-mails notification of its
failure and repair status. The radio buttons and check boxes associated with each
address field permit the administrator to specify specific e-mail requirements for
each recipient. Figure 3-17 shows a typical e-mail from the switcher.
Miles Standish
From:
Sent:
To:
Subject:
Redundant power supply has been installed in BME 0.
Figure 3-17 — Typical Matrix 12800 e-mail
Edit these fields and controls as follows:
1.
2.
3.
4.
5.
6.
www.camboard.de
3-28
Matrix 12800 Switchers • Virtualization/Control Software
CAMBOARD Electronics
The following characters are invalid in passwords: {space} ~ @ = ' [ ] { }
< > ' " ; : | \ and ?.
Click in the Mail Server Password field. The graphic cursor becomes a text
cursor.
Edit the case-sensitive password as desired.
Press the Tab key on the keyboard or click the mouse in another field to exit
the mail server password field.
Click the Take button to make the password change take affect.
Matrix 12800
Thursday, May 15, 2003 10:05 AM
Miles Standish
Power supply installed
Click in the desired E-mail Addressee field. The graphic cursor becomes a
text cursor.
Edit the e-mail address as desired. Standard e-mail address conventions
(nnnnn@xxx.com) apply.
Press the Tab key on the keyboard or click the mouse in another field to exit
the e-mail addressee field.
In the square check boxes associated with each addressee, select the Matrix
12800 modules for which the addressee is to be e-mailed.
In the round radio buttons associated with each addressee, select whether the
addressee is to be e-mailed regarding failures, fixes, both, or not be notified.
The None radio button is handy for temporarily removing personnel from the
e-mail list when they are unavailable, such as on travel or vacation.
Click the Take button to make the e-mail address changes take affect.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de

Advertisement

Table of Contents
loading

Table of Contents