Extron electronics Matrix 12800 Series User Manual page 41

im Vertrieb von
www.camboard.de
CAMBOARD Electronics
Figure 3-6 — Virtual map and list fields of Virtual Map screen
Map an unused connector to replace a current connector on the Virtual Map screen
as follow:
1. Click the Edit Mode box to enable mapping.
2. Click and begin dragging the unused connector. When you start dragging the
connector, the Virtual I/O Map field moves down the screen to the
connector's entry in the list field (figure 3-7).
Figure 3-7 — Dragging and dropping a connector
3. Drop the connector into the Virtual Ins or Outs Map field in the appropriate
frame.
The connector on the map from which you dragged turns white to indicate
that the connector is now unused. The connector indicator for the location to
which you dragged turns pale blue to indicate that it is now part of the virtual
plane. The Virtual Ins or Outs Map field entry for the virtual plane that you
reassigned changes to reflect the new physical connector for that virtual
interface. On the After reassignment view of figure 3-6, the reassigned virtual
input 20 green video plane connector is coded 0i127, which translates to BME
0, input connector 127.
Tel. 07131 911201
Matrix 12800 Switchers • Virtualization/Control Software
Fax 07131 911203
ce-info@camboard.de
3-11