Table of Contents
Advertisement
im Vertrieb von
Introduction, cont'd
Definitions
The following terms apply to Extron Matrix Switchers, and are used throughout
this manual:
www.camboard.de
1-8
Matrix 12800 Switchers • Introduction
CAMBOARD Electronics
Tie — An input-to-output connection.
Set of ties — An input tied to two or more outputs. (An output can never be
tied to more than one input.)
Configuration — May consist of one tie or one or more sets of ties.
Current configuration — The configuration that is currently being used (also
called configuration 0).
Global memory preset — A configuration that has been stored. The
Matrix 12800 can support up to 64 global presets. When a global preset is
retrieved from memory, it becomes the current configuration.
Room — A Room consists of a smaller subset of virtual outputs that are
logically related to each other, as determined by the operator. The
Matrix 12800 supports up to 32 rooms, each of which consists of from 1 to 16
virtual outputs.
Room memory preset — A configuration consisting of virtual outputs in a
single room that has been stored. When a room preset is retrieved from
memory, it becomes the current configuration. The Matrix 12800 supports
up to 10 room presets per room. Selecting a room preset only changes the
ties to outputs that are assigned to that room. All other ties outside the room
are not affected.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
