Table of Contents
Advertisement
im Vertrieb von
Set carriage return-line feed
Close
Help
Quit
www.camboard.de
CAMBOARD Electronics
Unless commanded otherwise, Telnet transmits a line feed character only (no
carriage return) to the connected Matrix 12800 when you press the
the correct setting for SIS communication with the Matrix 12800. The Telnet set crlf
command forces Telnet to transmit carriage return and line feed characters when
is pressed, but if crlf is set, the SIS link with the switcher will not function
Enter
properly.
To close the link to the Matrix 12800 switcher, access the Telnet prompt by typing
the Escape character (
+
]
Ctrl
For Telnet command definitions, at the Telnet prompt, type ? and then press
Exit the Telnet utility by typing quit at the Telnet prompt and then pressing
you are connected to the Matrix 12800, access the Telnet prompt beforehand by
typing the Escape character (
Tel. 07131 911201
Matrix 12800 Switchers • Ethernet Connection
Fax 07131 911203
). At the Telnet prompt, type close and then press
+
).
]
Ctrl
ce-info@camboard.de
key. This is
Enter
.
Enter
.
Enter
. If
Enter
A-7
Advertisement
Table of Contents
