When The Lcpu Stops Operation - Mitsubishi Electric MELSEC-L02SCPU User Manual

8.13

When the LCPU Stops Operation

The following shows the function status when the LCPU stopped its operation.
Function
Linear counter function
Ring counter function
Preset function
Coincidence Preset at coincidence output function
output
Coincidence detection interrupt function
function
Latch counter function
Latch counter function
Count disable function
Counter
function Sampling counter function
selection
Count disable/preset function
Latch counter/preset/replace function
Internal clock function
Frequency measurement function
Rotation speed measurement function
Pulse measurement function
PWM output function
CHAPTER 8 HIGH-SPEED COUNTER FUNCTION
Continues the previous operation before the LCPU stopped.
Stops the frequency measurement. The frequency that has been used for
moving average processing is abandoned. When the CPU module is switched
to the RUN status, executing Frequency measurement instruction (ICFCNT1)
starts measuring frequencies.
Stops the rotation speed measurement. The rotation speed that has been used
for moving average processing is abandoned. After the CPU module is
switched to the RUN status, turning on Rotation speed measurement
instruction (ICRCNT1) starts measuring rotation speed.
Stops the pulse measurement. When the CPU module is switched to the RUN
status, this function operates according to CH1 Pulse measurement start
command (SM1898).
Stops outputting PWM waveforms. When the CPU module is switched to the
RUN status, executing PWM output instruction (ICPWM1) starts outputting
PWM waveforms.
Operation
8
267