Mitsubishi Electric MELSEC-L02SCPU User Manual page 147

(c) Error
In the following cases, an operation error occurs. Error flag (SM0) turns on and an error code is stored into
SD0.
• A value other than 1 to 10 is specified in "n1" or "n2":
• Inapplicable device is specified in "n1" or "n2":
• The positioning function for the target axis is not set to "Use":
(d) Program example
Program that simultaneously starts positioning data No.1 for Axis 1 and positioning data No.10 for Axis 2 when
M0 turns on
CHAPTER 7 POSITIONING FUNCTION
(Error code: 4100)
(Error code: 4101)
(Error code: 4116)
7
145