Mitsubishi Electric MELSEC-L02SCPU User Manual page 249

(c) Error
In the following cases, an operation error occurs. Error flag (SM0) turns on and an error code is stored into
SD0.
• Other than 1 or 2 is specified to n.
• The device specified in
• Inapplicable device is specified in
• While 1 is specified to n, other than "Latch Counter Function" or "Latch Counter/Preset Function" is
selected for "Counter Function Selection".
• While 2 is specified to n, other than latch counter input signal is set to external input signals X8 and X9.
• Other than "Normal Mode" is selected for "Operation Mode Setting" of the specified channel.
• High-speed counter function of the specified channel is not enabled.
(d) Program example
The latch count value 1 of CH1 is stored into D100 and D101 when M0 turns on.
is exceeding its range.
D
.
D
CHAPTER 8 HIGH-SPEED COUNTER FUNCTION
(Error code: 4100)
(Error code: 4101)
(Error code: 4101)
(Error code: 4116)
(Error code: 4116)
(Error code: 4116)
(Error code: 4116)
8
247