General Instrument Functions; Opening The Sub-Screen; Selecting A Coolant; Switching The Preselected Coolant On/Off - Dentsply Sirona Sinius Operating Instructions Manual

4 Operation
4.5 Dentist element
96
4.5.8

General instrument functions

Settings for the coolant, instrument light, and foot switch can be made in
the sub-screen of the instrument removed from the holder.
The sub-screens vary according to the instrument removed. Functions
not available for the respective instrument are not displayed in the sub-
screen.
4.5.8.1

Opening the sub-screen

ü An instrument is removed from the holder.
ü In the Standard Start program operating mode, the touchscreen will
display the Instrument program of the instrument in use. In the
EasyMode Start program , the values for the speed and intensity of
the removed instrument are shown.
➢ Standard Start program : Touch the Sub-screen key.
EasyMode Start program : Press the Instrument program change
key.
Ä The sub-screen is displayed.
4.5.8.2

Selecting a coolant

Air, spray or NaCl can be preselected as the instrument coolant in the
sub-screen. The preselected coolant can then be switched on or off in
the Instrument program.
ü The Sub-screen of the removed instrument is displayed on the
touchscreen.
➢ Select the coolant required for the instrument removed from the
holder. Touch the Spray , Air or NaCl key.
Ä The key of the preselected coolant is highlighted orange. The
key of the preselected coolant is displayed in the Instrument
program or EasyMode Start program .
4.5.8.3

Switching the preselected coolant on/off

CAUTION
Instrument can be operated without coolant.
Tooth substance can be damaged by frictional heat.
➢ Always make sure that the treatment area does not overheat
whenever you switch the coolant off.
Dentsply Sirona
Operating Instructions Sinius
63 2 2 7 26 D3561
D3561.201.01.16.02 08.2018