Panoramic X-Ray Image Viewer; Switching On/Off The X-Ray Viewer Or White Screen On The Sivision Monitor - Dentsply Sirona Sinius Operating Instructions Manual

4 Operation

4.9 Panoramic X-ray image viewer

168
Panoramic X-ray image viewer
4.9
The Sinius TS treatment center can be equipped with an X-ray viewer
on the support arm of the dentist element arm.
An X-ray viewer cannot be attached to the Sinius and Sinius CS
treatment centers.
4.9.1 Switching on/off the X-ray viewer or white screen on the
Sivision monitor
The white screen function can be used if the treatment center has no X-
ray viewer, but is equipped with a Sivision monitor, see "Show/hide key
for white screen on Sivision monitor." [→ 195]
WARNING
Misdiagnoses of X-ray images are possible
Use the white screen of the Sivision monitor not for diagnosis of X-ray
images. The light intensity of the monitor is not sufficient.
Via touchscreen
ü The Start dialog is displayed on the touchscreen.
➢ Touch the X-ray viewer key or the White screen key.
Ä If the key is highlighted orange, the X-ray viewer is switched on
or the Sivision monitor is switched to white screen.
Via the assistant element
The Hash key on the assistant element can be configured in the setup
program. The key allows the user to switch the X-ray viewer or the white
screen function on the Sivision monitor on or off or alternatively to
activate the bell or hash relay, see "Setting function of the Hash key on
assistant element" [→ 195].
➢ Press the Hash key .
Ä If the hash key is set on the control of X-ray viewer or bell or
hash relay, the LED of the key lights up when the function is
activated.
If the White screen function is controlled in Sivision monitor
using the hash key , the LED of the hash key does not light up. It
is lit only when the X-ray viewer is switched on. In addition, the
White screen key is no longer shown in orange in the Start
program .
Dentsply Sirona
Operating Instructions Sinius
63 2 2 7 26 D3561
D3561.201.01.16.02 08.2018