Dentsply Sirona
Operating Instructions Sinius
63 2 2 7 26 D3561
D3561.201.01.16.02 08.2018
If you deposit the spray aspirator in its holder while the suction flow is
interrupted, the suction flow is automatically restarted when you pick it
up again.
4.14.4.6
Linking the headrest tilt to the 4-way foot switch
If a motor-driven headrest is used, control of the tilt patient couch
function using the 4-way foot control can be replaced by the headrest tilt
function.
➢ Touch the headrest tilt key.
Ä If the key is highlighted orange, the tilt of the motor-driven
headrest can be adjusted to the left and right using the 4-way
foot control.
➢ Change to the next setup program page.
4.14.4.7
Setting the hash key function on the assistant element
The Hash key on the assistant element can be assigned the X-ray
viewer function or, if the X-ray viewer function is set to the white screen
on the Sivision monitor, it can be assigned the white screen function.
See "Key for showing/hiding white screen on Sivision monitor" [→ 195].
Alternatively, the Hash key on the assistant element can also be used to
activate the bell or hash key, e.g. if neither an X-ray viewer or a Sivision
monitor is available.
➢ Press the X-ray viewer , bell , or hash key.
Ä The selected field is highlighted orange.
4.14.4.8
Setting the bell/hash fixed key as a pushbutton or as a switch
The relay assigned to the bell and hash keys can be actuated as a push
button or a switch.
● Field 1: Push button
● Field 2: Switch
➢ Touch the Bell and/or Hash key.
Ä The selected field is highlighted orange.
4.14.4.9
Key for showing/hiding white screen on the Sivision monitor
If the treatment center has no X-ray viewer but is equipped with a
Sivision monitor, the Sivision monitor can be set to the white screen
mode.
4.14 Configuration of the treatment center (setup)
4 Operation
195