1. Installation
1.2
Setting the CDVI-DN
1.2.1 Removing and mounting the left-hand end plate
Festo P.BE-CDVI-DN-EN en 0805a
Note
The CDVI-DN contains electrostatically sensitive devices.
Do not therefore touch any electronic components.
•
Observe the handling specifications for electrostatically
•
sensitive devices.
They will help you avoid damage to the electronics.
You must remove the left-hand end plate in order to set the
CDVI-DN.
3.5 Nm (... 4 Nm)
Fig. 1/2: Removing/mounting the left-hand end plate
1-5