Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 44

I N T R O D U C T I O N T O M A X P R O ® N V R
1
MAXPRO NVR Features
MAXPRO Status Monitor
MAXPRO Status Monitor is a brand new application in NVR V4.0 release that helps you to
search and monitor the NVR's (System or Recording Engine) in the current network. You can
monitor a single system/recording engine or multiple systems/recording engines at once. This
application is installed along with the NVR 4.0 software update and can be accessed on the
desktop.
You can manually add or auto search for NVRs and then connect to a single or multiple NVRs
(System or Recording Engine) to monitor the status of various parameters.
For a system you can monitor parameters such as CPU Consumption, Average Disk Queue
Length, Disk Write/Read and so on, depending upon the NVR connected.
For a Recording engine you can monitor parameters such as Total FPS Received/Recorded,
Total Bitrate Received/Recorded, Total Active Cameras and so on.
Recordi ng and Playback Operations
MAXPRO NVR supports simultaneous recording, live and playback viewing, search and
system management of all supported IP cameras including HD formats in a single server
instance.
On Demand li ve Streami ng (VOD)
On Demand Live Streaming feature allows you to configure and store recordings at camera
level. Later the recordings at the camera level can be synchronized back to view in NVR
viewer. This avoids persistent stream recording. MAXPRO NVR configured as On Demand Live
Streamer streams video from camera, only when a client request a live stream for viewing.
When all the clients close the particular camera, then streaming from the camera is stopped.
The NVR configured as On Demand streamer supports only Sync back edge recording.
On Demand live streaming is compatible from MAXPRO NVR Viewer, MAXPRO NVR Web
Clients and MAXPRO NVR Mobile app clients.
In your PC, by default On demand Live Streaming registry value is set to zero (disabled). User
needs to change the value to 1 to use this feature. See
feature in MAXPRO NVR
Recording support in On Demand video Streaming: It is also an add-on for the existing
Edge Sync Recording feature. This feature helps user to enable recording during on demand
video streaming. A check box is introduced in Configurator > System tab to enable this
feature. Earlier only live video was supported.
Profi le-G or Edge Sync Suppor t
Profile-G or Edge Sync feature allows you to synchronize the recordings from the camera SD
card to NVR. Camera SD card contains recordings that are configured on demand. This
features enables the user to playback only those recording which are saved on demand in the
SD card. User can enable the edge syn feature in Camera page and configure the day and
time for synchronizing in System window to get the recordings from the camera. Edge Sync
feature is applicable only to the cameras with SD card. This feature is supported only for New
EquIP Series model cameras.
Automatic Retry clips is an add-on for the existing Edge Sync Recording feature. This feature
is meant to retry and download the failed clips. It allows user to configure various parameters
in the config file to avoid clips download failure. If any clips fails to download then based on
the user configuration auto retry feature downloads the clips to NVR.
Low bandwidth Stream Settings:
Use Low Resolution Stream: This feature is to view the low resolution video in any format of
salvo layout. User needs to configure the low resolution (for any Primary or secondary stream)
44
section for more information.
MAXPRO NVR 5.6 Installation and Configuration Guide
How to Enable Video on demand