Figure 4-9 Choose Location For Maxpro Nvr Database Path - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

I N S T A L L I N G T H E N V R S O F T W A R E
4
Full Installation
6.
Figure 4-9
7.
80
Click Next. The SQL credentials validation status appears. After successful validation, the
Choose Database Location screen appears
Choose location for MAXPRO NVR database Path
There are two scenarios that are possible here, depending on your installation type:
• For Fresh installation of a MAXPRO NVR Database: The default path where the
MAXPRO NVR database is created automatically displays for a MAXPRO NVR
database fresh installation. Click Next to use the default path or click Browse to
select a new path if necessary and then click Next. The Choose Recording Drives
screen (Figure 4-10) appears.
• To retain the existing MAXPRO NVR Database: The path where the MAXPRO NVR
database is saved for a previously installed version of the MAXPRO NVR software
automatically displays. Click Next. A message "Trinity Database file already exists.
Do you want to retain the database" appears shown below. If you
• Click Yes. The Localization Support screen
• Click No. The Choose Recording Drives screen
(Figure 4-9).
(Figure 4-11) appears.
(Figure 4-10) appears.
MAXPRO NVR 5.6 Installation and Configuration Guide