Discovering And Adding Third Party Onvif And Axis Cameras - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

Deleting Additional Streams

Discovering and Adding Third Party ONVIF and AXIS Cameras

MAXPRO NVR 5.6 Installation and Configuration Guide
Note:
Ensure that the Resolution and FPS should match with the Camera and the NVR
secondary stream settings, else live video can not be displayed.
Ensure that you set the Primary stream for recording which is 720p resolution and
secondary stream for Live which is 4CIF. See
section for more information.
You can set the Bit rate value in the specific camera web page.
1. For the required camera, click
displayed see Figure 6-14.
Note:
If an additional stream is added then only the Delete Stream button is enabled.
2. Click the required stream tab (For example Stream 1, 2, 3) and then click the Delete
Stream button. A confirmation message Do you really want to delete the stream? is
displayed at the bottom of the screen.
3. Click Yes to delete Or click No to cancel. If you delete the primary stream then all the
configured child streams will be deleted.
The third party ONVIF and AXIS cameras that are discovered in the MAXPRO NVR user
interface do not display the model name. However, the Camera Type field associated to the
ONVIF and AXIS cameras displays "ONVIF DEVICE" and "No Streamer Type" in the Camera
Discovered pane on the Auto Discovery screen.
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
Recommended stream Settings
on the left corner, the camera properties pane is
149