Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 232

C O N F I G U R I N G M A X P R O N V R
6
Annotations
How to enable Annotation in NVR
In Camera Web Page
1.
2.
3.
In Preference Box
Note:
232
Navigate to Video Analytics > Smart Plan. The Smart Plan page is displayed.
If the Extensional Smart function is off, click to turn ON.
Select the Intrusion Trace or Loitering Trace check box to enable Annotation.
• In Preference > Rendering Setting tab, select the View Annotations when a camera is
displayed check box to enable annotations for all the supported cameras (Equip-S
Series)
• In Camera Properties, navigate to any stream and then select the Enable Annotation
check box for the particular stream.
For Sub stream 2 Annotation will not work, if the resolution is taken form camera
sub stream 2. This is a camera side limitation.
For PTZ camera based on the Preset selection, annotation will not work if there is
a slight movement beyond the defined preset.
MAXPRO NVR 5.6 Installation and Configuration Guide