Figure 8-13 Upgrade Finish - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

U P G R A D E M A X P R O N V R S O F T W A R E
8
Overview
Figure 8-13
9.
Note:
Upgrade to MAXPRO NVR 4.9 Build 204
Upgrade to 4.9 is supported as explained below:
To upgrade to MAXPRO NVR 4.9 Service Pack
254
Upgrade Finish
Click Finish to complete the upgrade.
While upgrading the client to 5.0, a System Warning dialog with Unknown Hard
Error message is displayed
Cause: This issue may occur due to conflict between third party applications or
due to system file corruption.
Solution: Refer and perform the steps as explained in the Microsoft link
https://answers.microsoft.com/en-us/windows/forum/windows_8-
performance/explorerexe-system-warning-dialog-with-unknown/4c0be311-c9d5-
46e7-b352-c8656f5c0226?auth=1
Or
https://www.drivethelife.com/windows-10/fix-unknown-hard-error-windows-
10.html
• From NVR 4.0 87 Rev H to NVR 4.9 Build 204
• From NVR 4.0 97 Rev B to NVR 4.9 Build 204
• From NVR 4.1 Build 123 Rev B to NVR 4.9 Build 204
• From NVR 4.5 Build 162 Rev B to NVR 4.9 Build 204
• From NVR 4.7 Build 188 to NVR 4.9 Build 204
MAXPRO NVR 5.6 Installation and Configuration Guide