Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 305

MAXPRO NVR 5.6 Installation and Configuration Guide
Once the Touch ID login is ON, the Configure Touch ID screen is displayed as shown below.
Apple mobile device
Tap Verify My Fingerprint to start verifying
the fingerprint.
3. Follow the instructions on the screen during the verification process. You need to touch
and hold the Home button multiple times to verify the fingerprint. If the verification is
successful then the Success message is displayed as shown.
Apple mobile device
Tap Done to complete.
M A X P R O N V R M O B I L E A P P
Android mobile device
Tap Verify My Fingerprint to start verifying
the fingerprint.
Android mobile device
Tap Done to complete.
Introduction
305