Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 39

Password Complexity and Expi ry Enhancements
MAXPRO NVR 5.6 Installation and Configuration Guide
Four Eye Authentication Support
This feature is also part of Privacy Protection setting and to meet the EU GDPR compliance
standards easily. This feature is to restrict all users in a surveillance system to perform
Playback operation. While performing playback operation at least two people from different
roles should authenticate. For an Administrator, user authentication is not required and can do
any playback operation. For an operator user, a popup is displayed and an Administrator user
or any other User with different role needs to authenticate to perform playback operation.
In MAXPRO NVR, a check box is introduced to enable this feature in Systems tab. By default
this check box is not selected. User need to obtain valid license to enable this feature.
The following table explains the Four Eye Authentication based on the user and roles
User
Administrator Or any other user with different
Operator
Operator
Operator
Clip Export with Anonymization support
Anonymization feature is supported for both Playback and Clip Export operation.
Note:
If a user exports a clip with Anonymization using Clip Export option then only
WMV format is supported.
The following are the enhancements:
• Improved change of password security by introducing complexity requirements. The
following are the password requirements.
• The password should have a minimum length of 12 characters.
• The password should consist of at least one number, one uppercase letter and
one special character
• If user changes the password, it will expire for every 90 days. Earlier it was no expiry
• If user wants to set the password which should never expire then navigate to
Configurator > Users tab. Select the Password Never Expire check box for the
specific user.
• User is notified with the message Your Password will expire in no.of days on the top
right corner of the screen.
• If Admin password is expired then the administrator can use the Change Password
feature in NVR log in screen to create a new one.
Note:
Only administrator will have access to user screen and can change the password
for operator. Operator should contact administrator for changing the password
and settings.
In Upgrade Scenario
If user upgrades to NVR 5.0 then the password complexity requirements will be applicable.
I N T R O D U C T I O N T O M A X P R O ® N V R
Authenticating User
role
Operator
Operator 2
MAXPRO NVR Features
Valid Authentication
Yes
No
Yes
39