Upgrade MAXPRO NVR Software
Overview
This chapter describes the procedures to upgrade the MAXPRO NVR software. Follow the
appropriate section in this chapter to upgrade your MAXPRO NVR software.
The following are the upgrade scenarios covered:
Upgrade to MAXPRO NVR 5.6 (Build 572)
Upgrade to NVR 5.6 Build 572 is supported from the following builds only.
To upgrade to MAXPRO_NVR_5.6:
MAXPRO NVR 5.6 Installation and Configuration Guide
•
Upgrade to MAXPRO NVR 5.6 (Build 572)
•
Upgrade to MAXPRO NVR 5.5 (Build 558)
•
Upgrade to MAXPRO NVR 5.0 SP1(Build 532)
•
Upgrade to MAXPRO NVR 5.0 Build 522(T Patch)
•
Upgrade to MAXPRO NVR 5.0 Build 509 Rev D
•
Upgrade to MAXPRO NVR 4.9 Build 204
•
Upgrade to MAXPRO NVR 4.7 Build 188
•
Upgrade to MAXPRO NVR 4.5 Build 162
•
Upgrade to MAXPRO NVR 4.1Build 123 Rev B
•
Upgrade to MAXPRO NVR 4.0
Note:
Downgrade to previous version of NVR is only supported if user has restored the
Database backup during installation. For example: If user upgrades from 4.1 to
5.0 and if for any reason uninstalls the 5.0 build then, 4.1 installation will also be
uninstalled from the machine. If user has restored the DB backup during 5.0
installation then downgrade (4.1) build will be available.
•
MAXPRO NVR v5.0 Build 509 Rev D
•
MAXPRO NVR 5.0_T patch Build 522
•
MAXPRO NVR 5.0 SP1 Build 532
•
MAXPRO NVR 5.5 Build 558
8
245