C O N F I G U R I N G M A X P R O N V R
6
Annotations
4.
5.
6.
226
Once done, click Save in the bottom of the page. Data saved successfully message is
displayed.
Click on Zones and then click on Add area to add define the area for intrusion trace. This
will be the area under which an alarm is generated if an object is detected. User can
define multiple zones.
Read the on screen instructions and set the parameters for the zone such as Minimum
width, Maximum width, Minimum height, Maximum height, Minimum area, Maximum
MAXPRO NVR 5.6 Installation and Configuration Guide