Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 216

C O N F I G U R I N G M A X P R O N V R
6
Guidelines to configure NAS Drive for Recording
User needs to have the below privileges to access the archived clips from remote NVR clients.
Below table details out the possible combinations to play the archived clips from client
machine.
Configured Archival
path NVR Server
NVR Server
(10.78.34.100): D:\archival
Configured Archival path
NVR Server
NVR Server
\\10.78.34.100\archival
How to achieve the above Scenario 2 in Domain Environment
Refer the Windows specific documentation on how to configure the NVR Server and NVR
client to the same domain controller.
How to achieve Scenario 2 in Work group
Different Scenarios to playback Archived Clip
Clip does not exist or you do not have the permission to view it" message is displayed if user
drag and drop a archived clip on a salvo. This is because of the client machine has no access
to the Archived shared path. Access permission to Archival shared drive should be granted to
client machine also.
Below table explains various scenarios in which the archived clip is playable. User needs to
perform suitable scenario settings to avoid the error message and playback the clip.
216
• Scenario 1: If user has configured Fixed drive in NVR Server For Archival.
Then Client should have
access to this path
\\10.78.34.100\D$\archival
• Scenario 2: If user has configured shared path in NVR Server for archival then user
need to configure the Archival drive as UNC path.
Then Client should have access to this path
\\10.78.34.100\archival
• NVR Server and NVR client should be added to the same domain environment
• Add two user in the Domain Controller as mentioned below
• Add one Domain user as the Local Administrator in NVR Server
• Add another Domain user as a local Administrator in NVR Client (Check whether
it is only local administrator or less privileges access)
• Scenario 3: If user using NAS drive
If NVR Server Path
(using NAS as
archival location):
\\10.78.34.200\NVR_A_AR
CHIVAL
• Scenario 4: If user using SAN then client can be accessed as mentioned in Scenario
1 above.
Description
User can access with this admin share only if the
logged in user of NVR client is a local administrator
in NVR server.
(Read Only access)
The Client path to access
\\10.78.34.200\NVR_A_ARCHIVAL
MAXPRO NVR 5.6 Installation and Configuration Guide