Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 84

I N S T A L L I N G T H E N V R S O F T W A R E
4
Full Installation
Note:
Install ing Web Client
By default MAXPRO NVR 4.0 installs the Web Client component on your machine. It also
installs the MaxproWEBConfigurator utility to change or update the system and server
configuration. If you want to access the MAXPRO NVR Server using Web Client remotely
through a supported web browser then you should install Silverlight on the remote machine.
Caution:
Prerequisites to access MAXPRO NVR Server through
We b Clie nt
The following are the prerequisites to access the MAXPRO NVR server through Web Client:
84
In MAXPRO NVR 3.1 or later version, a new scheduled backup mechanism is
added which will retain the last 7 days of Database Backup. In a fresh installation
scenario, by default the first recording drive is selected for database backup
according to the alphabetical order. If you want to change the drive then edit the
TakeNVRbackup.bat file which is available in C:\Install\BackupData and
mention the required drive name.
• Issue: While installing NVR 5.0, a System Warning dialog with Unknown Hard Error
message is displayed
Cause: This issue may occur due to conflict between third party applications or due
to system file corruption.
Solution: Refer and perform the steps as explained in the Microsoft link
https://answers.microsoft.com/en-us/windows/forum/windows_8-
performance/explorerexe-system-warning-dialog-with-unknown/4c0be311-c9d5-
46e7-b352-c8656f5c0226?auth=1
Or
https://www.drivethelife.com/windows-10/fix-unknown-hard-error-windows-10.html
For better security, close the browser upon logout.
• Silverlight: Ensure that Silverlight version 5 and above is installed on your machine.
If you don't have the Silverlight plug-in on your machine, you can download it from
the following Microsoft link. http://www.microsoft.com/getsilverlight/Get-
Started/Install/Default.aspx
MAXPRO NVR 5.6 Installation and Configuration Guide