Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 271

MAXPRO NVR 5.6 Installation and Configuration Guide
Note:
If you want to access the web client using secured connection then click the
HTTPS option. When you access the MAXPRO NVR server using the URL
https://<MAXPRO
name>/MAXPROWEB/ then the following message is displayed. Click Continue
to this website to proceed. It is recommended to verify the certificate to check
whether it is issued by a valid authority. See
for more information.
The above message appears by default when you access the NVR server for the
first time. Honeywell recommends you to buy a Domain Name specific certificate,
create it and then install it. See the
page 274 and Installing the Certificate
Or You can use the MAXPROWeb Configurator utility to create the Self Signed
Certificate.
Or
You can create a self signed certificate and then install it. See the
Signed Certificate
page 278 for more information.
The above settings are applicable to Internet Explorer, Chrome, Firefox and Safari
web browsers. These settings are valid if the web client is accessed using the
Domain/Host Name. If you access the web client using the IP then the above
settings are not valid.
Caution:
For better security, close the browser upon logout.
5. Under PTZ Configuration:
• Select the Enable PTZ check box to perform PTZ operations on a PTZ camera from
Web Client.
Note:
PTZ feature is not supported and It is not recommended to use this feature in the
current release. Enabling PTZ will help in performing PTZ operations fro DOME
cameras from web client.
6. Click Save.
NVR Server IP
Viewing the Certificate Information
Creating Self Signed Certificate
section on page
section on page 274 and Installing the Certificate
M A X P R O N V R W E B C L I E N T
or Machine /Computer
section on
278 for more information.
Creating Self
section on
271