Step 2: Discover And Configure The Axis Camera/Encoder In Maxpro® Nvr - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

A P P E N D I X B
B
MAXPRO®NVRs - AXIS Camera/Encoders Discovery and Configuration (using ONVIF)
5.
Step 2: Discover and Configure the AXIS
Camera/Encoder in MAXPRO
1.
2.
3.
4.
5.
Note:
344
Add and discover the AXIS camera in MAXPRO NVR using the default user name root
and password pass.
In MAXPRO NVR, click the Configurator tab. The System page displays by default.
Click the Camera tab to open the Camera page.
Click the Auto Discovery button, the Auto Discovery screen is displayed.
After the discovery, to add the AXIS cameras, first clear the check boxes corresponding to
all other cameras other than AXIS cameras.
Select a AXIS camera that you want to add under. type the User Name and Password of
the third party AXIS camera as shown in the following figure.See the
Auto Discovery Settings section on page
The default user name is root and password is pass.
®
NVR
Configuring the
146 for more information.
MAXPRO NVR 5.6 Installation and Configuration Guide