Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 174

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Cameras
10.
11.
12.
PTZ Settings for Analog Camera
MAXPRO NVR now supports the advanced PTZ settings for an analog PTZ camera.
Note:
To set the PTZ settings
1.
174
Under Primary Stream > Schedules
• Recording Settings:
• Continuous Recording - All cameras added are defaulted to "24/7" recording.
You can choose a different option from the drop-down list.
• Event Based Recording - This is "None" by default. Select an option from the
drop-down if you want to do motion based recording.
• Recording Deletion Settings:
• Select the Event Recording clip deletion duration.
• Select the Continuous Recording clip deletion duration.
• Archive Recording Older Than:
• Continuous - This is "None" by default. Select an option from the
drop-down if you want to archive the continuous recording.
• Event - This is "None" by default. Select an option from the
drop-down if you want to archive the event recording.
• Delete Archived Recording After:
• Continuous Recording - This is "365 Days" by default. Select the number of
days from the drop-down after which the archived continuous recording can be
deleted.
• Event Recording - This is "365 Days" by default. Select the number of days
from the drop-down after which the archived event recording can be deleted.
Under Primary Stream > Preferences > Stream Preferences Settings. See
more information.
Click Save.
Advanced PTZ settings are available only for analog PTZ cameras.
Select the required analog PTZ camera from the camera pane.
MAXPRO NVR 5.6 Installation and Configuration Guide
step 5 for