Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual page 290

M A X P R O N V R W E B C L I E N T
9
Procuring and Installing CA Certificate
3.
Note:
Step 2: Changing the Port in the MAXPRO Web Client and
MAXPRO Mobile app
1.
2.
1.
To change the port in MAXPRO NVR Web Client:
Note:
Caution:
290
Under Port Configuration:
• Http Port: If you want to change the http default port 80 to some other port number then type the required port
number and click Apply.
• Https Port: If you want to change the https default port 443 to some other port
number then type the required port number and click Apply.
Port change option in the configurator tool is available from 3.1 Build 65 Rev C or
higher version.
Launch MAXPRO Mobile by tapping
Before you log on: Tap + in the right hand side to add NVR
Add the MAXPRO NVR Server:
• Select whether you want to connect through Remote network or Local network
• In the name field, enter the name (For example Demo/Site name) for the NVR.
• In the IP Address field, type the IP address/Host Name of the unit
• Type the Port number. The default port number is 443.
• Tap Add.
• Type the URL https://<MAXPRO NVR Server IP or Computer/Machine
name>:<PORT>/MAXPROWEB/ in your web browser and then press Enter. The
log In page appears.
<MAXPRO NVR Server IP or Computer/Machine name> needs to be replaced
by the IP address or Computer/Machine name (as applicable) of the MAXPRO
NVR Server machine on which both the Web Server and the NVR Server are
installed by default. <PORT> needs to be replaced by the new port. For
example: if the port is changed to 1024 with the steps above, enter the URL as
https://74.x.x.x:1024/MAXPROWEB/
For better security, close the browser upon logout.
on your mobile device.
MAXPRO NVR 5.6 Installation and Configuration Guide