Table of Contents
Advertisement
System Configuration Continued
Upgrade Firmware
______________________________________________________________________________________________
Document 800-06801 Rev F
02/13
Use DST – After completing the Time Zone setup, highlight USE DST and
press ENTER to turn Daylight Saving Time ON / OFF.
NTP Type – Highlight NTP (Network Time Protocol) and press ENTER to
SYNC the DVR with the Network Time.
Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch
confirmation].
Auto Log Off – OFF or 1-10 Minutes [This feature will close the Configuration
Menu after XX minutes of inactivity. This is a security feature.]
S/W Upgrade – Start firmware upgrade from selected media (USB or
CD/DVD)
1.
Press SETUP on the front panel or remote control.
or
Click MENU on the hover menu and select SETUP.
2.
Select SYSTEM > SYSTEM CONFIGURATION.
3.
Click S/W UPGRADE to open the UPGRADE FIRMWARE window.
4.
Insert the CD/DVD or USB device.
5.
Select the media type (DVD/CD-ROM / USB HDD/STICK).
6.
Click SCAN.
7.
Click OK to start the upgrade.
HRDP H.264 Rev B DVR User Guide
31
Advertisement
Table of Contents
