Connecting Cameras; Supported Ip Cameras; Table 1-1 Supported Ip Cameras - Honeywell Rapid Eye Hybrid LT Installation Manual

Introduction

Connecting Cameras

Supported IP Cameras

Camera Model Versions that
equIP HCD554IP
equIP HCS554IP
equIP HD4DIP
equIP HD3MDIH
equIP HD4MDIH
equIP HCD5MIH
HD3MDIP
HD4MDIP
ACUIX IP
HD44IP
HD45IP
HD54IP
HD55IP
equIP HD3HDIH
equIP HD4HDIH
equIP HCD5HIH
equIP HD3MWIH
20
Connect a coaxial cable of each analog camera (maximum 4 or 8, depending on the DVR
model) to the Rapid Eye Hybrid LT DVR. Connect the first camera to Video Input 1, the
second to Video Input 2, and so on. For more information, see
28, and Cabling on page 71.
For more information on IP camera installation and configuration, refer to the
Hybrid HD and Hybrid LT Digital Video Recorders System Administrator
the documentation CD. See
on the Rapid Eye Hybrid LT V10.1 DVRs.
Table 1-1 lists the IP cameras that are supported by your Rapid Eye Hybrid LT V10.1 unit.
More cameras will be added in future releases. Supported camera features (for Honeywell
and supported ONVIF IP cameras) are also listed in this table.
Table 1-1 Supported IP Cameras
Software
H.264
support Streaming
V10.0+ 
V10.0+ 
V10.0+ 
V10.0+ 
V10.0+ 

V10.0+

V10.0+

V10.0+

V10.0+

V10.1+

V10.1+

V10.1+

V10.1+

V10.1+

V10.1+
V10.1+ 
V10.1+ 
Table 1-1 for a list of IP cameras and their supported features
Supported Features
Tamper
MPEG4 Detection (CSD
Streaming Analytics)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Connecting a Camera, page
Rapid Eye™
Guide, included on
Motion GPIO PTZ
Detection
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  