Installing A Glass Liner - Valor LX1 Installation Manual

Installation

Installing a Glass Liner

The 2100RGP Refl ective Glass liner is installed diff erently
than the ceramic liners.
1. Loosen (but do not remove) the screw next to the
panel retaining bracket in the roof of the fi replace,
and slide the bracket away from the wall.
2. Slide the liner in from either side, between the wall
and the light rail and retaining bracket.
3. Slide the retaining bracket against the liner and
tighten the screw.
4. Fold the bottom clip along its perforation into a right
angle, as shown.
5. Slide the bottom clip down onto the metal edge at
the bottom of the liner.
Liners are fragile, never force one into place.
If you have diffi culty inserting the liner from
one side, remove the opposite window and
install from the other side.
Liners
37