Installation
Installing Glass Murano Set 2100DGM
Material required
• Decorative Glass Murano Set, which contains:
• 2 Murano glass covers
• 8 x 1/4" ceramic pads (not pictured)
• 1 bag 1/2" clear fi reglass (not pictured)
• Gloves, if desired
Installation
Carefully unpack the kit. Install the set as follows.
1. Arrange the 1/4" ceramic pads evenly on the media
tray, surrounding the burner.
2. Place glass covers 6857 and 6858 onto the ceramic
pads as shown. Note the cutout in 6857 that fi ts
around the pilot light.
44
3. Place fi reglass onto the burner by hand. You may not
need to use the entire bag.
4. Ensure the pilot safe zone is clear of fi reglass. This
ensures proper ignition.
5. The completed arrangement will look like the one
below.
•
Note some minor adjustments may be needed to
improve fl ame picture.
Fuel Beds