Installing Handles - Valor LX1 Installation Manual

Appliance Preparation
Installing Carrying Handles
The fi replace ships with two carrying handles attached
to the shipping pallet - they must be properly attached
to the fi replace for lifting the unit.
1. Locate the handles. They are screwed onto the
shipping pallet.
2. A plastic bag with screws for installation is attached
to one of the handles. Remove handles and the bag,
and save the screws.
3. Fasten handle on the wall end with six screws.
4. On the other end of the unit, fasten the other handle
on with six screws.
5. With the handles installed, the fi replace is now ready
to lift. Unscrew the fi replace feet from the pallet.
The handles may be removed and discarded when the
unit is placed in its fi nal location and ready for installa-
tion.
Caution
Do not lift the unit without using the carrying
handles.

Installing Handles

27