Installation
Installing a Ceramic Liner
The ceramic Limestone (2200LMP) and Fluted Black
(2200FBP) liner kits are both installed the same way.
1. Loosen (but do not remove) the screw next to the
panel retaining bracket in the roof of the fi replace,
and slide the bracket away from the wall.
2. Insert the top of the liner (the thinner end) in the gap
between the wall and the retaining bracket.
3. Swing the bottom of the liner toward the wall until
fl at.
36
4. Slide the retaining bracket against the liner and
tighten the screw.
5. Slide the bottom clip down onto the metal edge at
the bottom of the liner.
Liners are fragile, never force one into place.
Liners