Appendix B - Remote Control Operation - Valor LX1 Installation Manual

Appendix B - Remote Control Operation

Initial Pairing
Before the remote control can be used with the fi replace, it must be paired. See "Remove the Windows" on page
26.
Main Display
Child Proof
Countdown Timer
Program Mode
To Turn On Fire
NOTE: When pilot ignition is confi rmed, motor
automatically turns to maximum fl ame height.
One-Button lighting (default):
Two-Button lighting: +
simultaneously
Press and hold for 4 seconds, until 8
short beeps and a blinking series of
lines confi rms the start sequence has
begun. Release button.
Main gas fl ows once pilot ignition is
confi rmed.
Handset automatically goes into
manual mode after main burner
ignition.
Standby Mode (Pilot Flame)
Press and hold to set appliance to
pilot fl ame.
Time
AM
PM
ON
OFF
Temperature
To Turn Off Fire
Press
Note: There is a 2 minute delay after
switching off before the next ignition is
possible.
Flame Height Adjustment
To increase fl ame height, press and
hold
To decrease fl ame height, press and
hold
down until the fi re is set to pilot fl ame
only.
Signal Indicator
Thermostatic Mode
Auxiliary Feature (not used)
CAUTION: If the pilot does not stay lit after
several tries call your local service technician or
gas supplier.
to turn OFF.
CAUTION: Always check the fi re and pilot visu-
ally to ensure they are off .
.
. You may hold the button
Battery Status
Fan (if included) (not applicable)
°F or °C
Light
Eco Mode
AM
61