Screwing And Drilling Restrictions - Valor LX1 Installation Manual

Installation Planning

Screwing and Drilling Restrictions

Because of gas, controls, and electrical services behind
the fi replace's walls, there are two areas where you must
not drill or place screws.
See the diagrams at right for dimensional details of these
restricted areas.
WARNING
DO NOT SCREW OR DRILL in the areas
marked in the diagrams at right. Electric
shock and/or explosion risk present.
WARNING
In ANY area of the fireplace (even outside
of the restricted areas) choose a screw
length that will not intrude into the interior
of the fireplace more than 3/8" [10 mm]
deep.
18
Gas and Controls Side
Electrical Side
Wall Finish