Cleaning Your Fire; Metal Parts; Window Glass - Valor Black Beauty Slimline Installation And Owner's Manual

To maintain the high performance and quality finish of your Valor Fires fire, please
follow these guidelines:
Before attempting to clean the fire, please remember to turn off the fire and wait for
-
the appliance to cool. The fire will retain heat for some time before cleaning can
begin.

Metal parts.

Clean the metal parts with a slightly damp cloth and then dry.
-
Do not use abrasive cleaners as these will scratch the fire surface.
-

Window glass.

Remove any stains on the window with a
-
non-abrasive cleaner such as a ceramic hob
cleaner. Do not use abrasive cleaners.
Access to the window:
1. Detach the window surround by sliding it
upward and then swinging the bottom
forward. Lift and store carefully (See figure
5).
2. After cleaning, refit the window surround
by sliding the surround upward to locate its
upper tabs in the slots underneath the fascia
hood. Push the bottom of the
surround fully against the
fascia cross panel. Drop the
surround down so that the
two screw heads at the back
of the surround locate in the
keyholes in the cross panel
(See figure 6).
©
GDC Group Ltd. JAN 2017
OWNER GUIDE

CLEANING YOUR FIRE

Figure 6. Window surround fitting
Page 38
Figure 5.