Installation
Installing Birch Log Kit 2100BLK
Material required
• Birch Log Kit, which contains:
• 7 logs
• 2 supports
• 1 bag of embers (not pictured)
• 1 bag of splinters (not pictured)
• Gloves, if desired
Log placement on media tray and burner. Black dots indicate
holes for support placement.
Installation
Carefully unpack the kit. Note the logs have numbers
pressed into their undersides. Install the logs as follows.
1. Place 2 supports over the holes indicated by the two
black dots in the diagram above.
38
2. Place log L4 on top of the left hand support, and
position log across the media tray.
3. Place log L8 on top of the right hand support, and
position log across the media tray.
4. Place log L3 across log L4 as shown.
Fuel Beds