Installation Planning; Before Installing - Valor LX1 Installation Manual

Installation Planning

Caution
Only qualified, license, or trained personnel
should install this appliance.
1. YOU NEED TO KNOW FROM THE HOMEOWNER:
• The thickness and type of wall fi nish around the
appliance.
• What accessories (if any) will be installed with this
unit.
2. Unpack the appliance but keep the barrier screens in
their packaging to protect them. Recycle the packag-
ing.
3. Remove one of the windows (see page 26) and
remove all items inside the fi rebox.
4. Check that you have everything, using the Pack Con-
tent sheet. Also, check that you have:
• A fuel bed (packed separately)
• A liner (packed separately)
• Remote Battery and Wall Switch Kit
• HeatShift duct kit (mandatory, packed separately)
• Gas conversion kit (if necessary)
• Venting accessories
• Electrical accessories
5. Carefully read the Installers Checklist included with
the fi replace for the installation sequence.
WARNING
A HeatShift kit MUST be installed on this
appliance!
Note: The following steps must be done BEFORE
the appliance is placed in its fi nal position, since the
connections are done from the back of the appliance:
• Electrical connections
• Gas connections
• Gas conversion (if needed)
• Wiring of the Remote Battery and Wall Switch
Kit (RBWSK)

Before Installing

9