Mounting Positions - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

3.4

Mounting positions

NOTICE
Gearbox damage due to incorrect mounting position
Incorrect mounting positions result in inadequate lubrication of gearboxes. Inadequate
lubrication can cause gearbox damage.
• Only operate the gearbox in the mounting position specified on the rating plate.
Note
Gearbox sizes 19 and 29 are lubricated for life. These gearboxes have no openings for
checking the oil level.
Mounting positions M2 and M4 are equipped with a vent valve.
C29 has a vent valve in all mounting positions.
Table 3- 4
Symbol
Table 3- 5
Symbol
A, B
②
③
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
Symbols - Oil valves
Meaning
Identifying marking of vent plug
Identifying marking for ventilation, opposite side
Identifying marking for oil level plug
Identifying marking for oil level, opposite side
Identifying marking for oil drain plug
Identifying marking for oil drain, opposite side
Symbols - Supplements
Meaning
Output side A, output side B
2-stage gearbox
3-stage gearbox
Position of the connection plug
Preparing for use
3.4 Mounting positions
47