Siemens SIMOTICS S-1FG1 Operating Instructions Manual page 145

Table 9- 1
Operating times and intervals
Commissioning
3 hours
1 day
Operation
Daily; if possible, more fre-
quently during operation.
Monthly
Every 3 000 operating hours, or
at least every 6 months.
Once a year.
Every 10 000 operating hours,
or at the latest after 2 years
Every 10 000 operating hours,
or at the latest after 2 years
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
Maintenance measures after operating times or intervals
Check that fastening bolts on
gearboxes and add-on elements
are securely tightened. Check
that covers and plugs are se-
curely fastened.
Checking the oil level.
Check the housing temperature. Cooling of the servo geared
Monitor and check the geared
motor for unusual noise, vibra-
tions, and changes.
Check the gearbox for leaks.
Monitor and check the geared
motor for unusual noise, vibra-
tions, and changes.
Check the housing temperature. Cooling of the servo geared
Check the gearbox for leaks.
Checking the oil level.
Check the oil quality.
Clean the gearbox.
Check the rubber buffer of the
torque arms.
Check the corrosion protection
and repair, if necessary
Replace the venting valve, if
present.
Changing the oil and the roller
bearing grease in the gearbox
Check that fastening bolts on
gearboxes and add-on elements
are securely tightened. Check
that covers and plugs are se-
curely fastened.
Changing the oil and the roller
bearing grease in the gearbox
9.2 Inspection and maintenance
Measure
Checking tightness of fastening
bolts (Page 158)
Checking the oil level (Page 145)
motor (Page 31)
Consult your Siemens repre-
sentative
(http://www.siemens.com/industr
y/contact) if you detect any ab-
normalities
Checking the gearbox for leaks
(Page 156)
Consult your Siemens repre-
sentative
(http://www.siemens.com/industr
y/contact) if you detect any ab-
normalities
motor (Page 31)
Checking the gearbox for leaks
(Page 156)
Checking the oil level (Page 145)
Checking the oil quality
(Page 147)
Cleaning the gearbox (Page 157)
Torque arms with shaft-mounted
gearboxes (Page 100)
Replacing the vent valve
(Page 158)
Changing oil (Page 148)
Change the roller bearing grease
(Page 152)
Checking tightness of fastening
bolts (Page 158)
Changing oil (Page 148)
1)
Change the roller bearing grease
(Page 152)
Service and maintenance
Description of the work
143